Meiting: lamp holder manufacturer and lamp holders wholesale

Established in 1988, Meiting Household Products Co.,Ltd. a professional lamp holder manufacturer of household appliance and hardware products in China. Through more than ten years' development, we have accumulated rich experience on holder, pad and household products. Our cheap lamp holders products passed the evaluation of CE, GS and UL certifications, and our company passed ISO9001 (version 2000) certification. 98% of lamp holder products are exported to East Asia, Southeast Asia, Europe(UK, France, Italy, Germany, Spain), America, Canda and USA.

Lamp Holders are handy for mounting an extension lamp onto the side of the loom. They are designed for our Standard Low Castle Floor Loom and can be installed on one or both sides of the loom. The High Castle Standard Floor Loom already has holes drilled on the top castle to accommodate a lamp. You can also mount a Lamp Holder on a Mighty Wolf Loom, but you need to request shorter screws when ordering it. On the Baby Wolf, a Lamp Holder mounted on the side castle will restrict the folding ability of the loom. However, the Baby Wolf High Castle Tray has holes in the top for the post of an extension lamp, so a lamp holder is not needed when using a high castle tray.

The LM15EB is a Lamp module which fits into a standard bayonet lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands.
The X10 House Code and Address is programmed via an X10 transmitter (IR7243, Mini Controller, Maxi Controller, etc). Note that you cannot use a CM12 to set the House Code/Address.
Please note the this module is NOT dimmable. It functions as On/Off only.
Remove the light bulb from its socket and insert the LM15 into the light socket
Insert a light bulb (see Technical Data below for maximum wattage) into the LM15.
Turn the lamp switch on if appropriate
Set any X-10 controller to the House Code and Unit Code you want want the LM15 to respond to
Press the ON button (corresponding to the Unit Code you want the LM15 to respond to) on the X-10 controller three times, at about one second intervals. On the third press, the lamp will turn on signifying that the code has been learnt. To set the code from an IR7243 press the number three times only
To change the code that the LM15 responds to, turn off the power to the unit, turn it back on and repeat the previous step within 30 seconds after applying power

lamp holders show

	Lamp Holders are handy for mounting an extension lamp onto the side of the loom. They are designed for our Standard Low Castle Floor Loom and can be installed on one or both sides of the loom. The High Castle Standard Floor Loom already has holes drilled on the top castle to accommodate a lamp. You can also mount a Lamp Holder on a Mighty Wolf Loom, but you need to request shorter screws when ordering it. On the Baby Wolf, a Lamp Holder mounted on the side castle will restrict the folding ability of the loom. However, the Baby Wolf High Castle Tray has holes in the top for the post of an extension lamp, so a lamp holder is not needed when using a high castle tray.
	The LM15EB is a Lamp module which fits into a standard bayonet lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands. The X10 House Code and Address is programmed via an X10 transmitter (IR7243, Mini Controller, Maxi Controller, etc). Note that you cannot use a CM12 to set the House Code/Address. Please note the this module is NOT dimmable. It functions as On/Off only. Remove the light bulb from its socket and insert the LM15 into the light socket Insert a light bulb (see Technical Data below for maximum wattage) into the LM15. Turn the lamp switch on if appropriate Set any X-10 controller to the House Code and Unit Code you want want the LM15 to respond to Press the ON button (corresponding to the Unit Code you want the LM15 to respond to) on the X-10 controller three times, at about one second intervals. On the third press, the lamp will turn on signifying that the code has been learnt. To set the code from an IR7243 press the number three times only To change the code that the LM15 responds to, turn off the power to the unit, turn it back on and repeat the previous step within 30 seconds after applying power
household products